Overview
This range of pixel fixtures from ENTTEC use the SMART PXL (SPXL) protocol. The range offers a selection between RGB and RGBW LEDs, and a wide array of physical options. The IC chip used within these fixtures is a SOP8 package, and the details of these chips are described in full below.
Advatek PixLite Mk3 hardware can control SMART PXL using a 16-bit or 8-bit input data source. 16-bit input data allows precise control for high resolution applications. When using an 8-bit input data source, PixLite can apply gamma correction and upscale to 16-bit to enhance the visual output of these products.
SMART PXL 24V variants are compatible with all PixLite Mk3 controllers, and the 48V variants can be easily driven by the R1 receiver with its 5-48V input range.
Note: Advatek Lighting is in no way affiliated with ENTTEC, or the SPXL product.
Specifications
PixLite Mk1 | |
PixLite Mk2 | |
PixLite Mk3 | |
Clock Type | Data-Only |
Color Resolution | 16 Bits |
Current Control | |
Physical Package | SOP8 |
RGB | |
RBGW | |
PWM Rate | 4000Hz |
Suitable Camera | Up to 133fps |
Data Transfer Rate | 800kbps |
Redundant Data Line |
Considerations for Use
Advantages
- 24V and 48V fixture options allows for very long cable lengths
- High PWM rate allows for filming these pixels with cameras up to 133FPS
- 16 bits of data for each color makes dimming curves very smooth
- Option for white LED allows for higher brightness and more color mixing options
Disadvantages
- Data-only restricts refresh rates to be limited by the speed of the protocol, which can be slow
- No redundancy in data
- Digital current control is not supported, so the color mix cannot be digitally tuned on-site.
Need Help with Your Next Project?
PixLite Support
Are you looking for pixel drivers that are compatible with ENTTEC SPXL, and work with Art-Net or sACN?
All PixLite Mk3 products support ENTTEC SPXL as an available Pixel IC type, so get in touch with us to find out how the lighting specialists at Advatek can support you in your pixel lighting project.
PixLite® A4-S Mk3
Driving up to 24 universes of data, and offering easy mounting, sleek design and electrical fault protection — what’s not to love?
PixLite® E4-S Mk3
The E-series LED pixel controller is made for tighter budgets thanks to its ability to drive up to 24 universes of LED pixel control and route power directly to LEDs.
